Brandon12
Well-Known Member
I found one online for 15 bucks but i was wondering if i could get a rough estimate of about how long it takes to replace it and if anything is needed besides the regular tools. 
thanks
thanks
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Steering column replacement
- Thread starter Brandon12
- Start date
- Joined
- Jun 1, 2001
- Messages
- 7,897
- Age
- 64
- Vehicle Year
- 1987... sorta
- Transmission
- Manual
Gen 1 truck?
The only confusing thing is that the sheet metal screws that mount it to the firewall
have 3/8" heads and are most easily removed with a long extension and a 3/8" swivel socket.
Gen2 trucks have "Pem Nuts" in the firewall and use metric threaded machine screws (6mm) with 10mm heads.
AD
The only confusing thing is that the sheet metal screws that mount it to the firewall
have 3/8" heads and are most easily removed with a long extension and a 3/8" swivel socket.
Gen2 trucks have "Pem Nuts" in the firewall and use metric threaded machine screws (6mm) with 10mm heads.
AD
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
