AzLizard
Well-Known Member
I have an 84 ranger with a 2.8 I am looking for the steel fuel line that goes from the fuel pump up to the carburetor.
Thank you.
Thank you.
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Wanted Steel fuel line
- Thread starter AzLizard
- Start date
- Joined
- Nov 13, 2018
- Messages
- 5,000
- City
- Canaan
- State - Country
- NH - USA
- Vehicle Year
- 1993
- Vehicle
- Ford Ranger
- Drive
- 2WD
- Transmission
- Automatic
- Total Drop
- 3"
- Tire Size
- 235/55R16
- My credo
- If you don't have time to do it right will you have time to do it over?
Get something like this and a length of 5/16" steel tubing and make one. I use a double flaring tool to make a slight bubble on the carb end so the rubber hose will stay on.
AzLizard
Well-Known Member
Went to have a line made and was told there is nothing wrong with it, and that it should seal.
I repulled the new fuel and will be returning it. It looks like it was installed before and the stripped the threads in the connection.
Thanks for your response.
I repulled the new fuel and will be returning it. It looks like it was installed before and the stripped the threads in the connection.
Thanks for your response.
- Joined
- Jul 25, 2009
- Messages
- 134
- Age
- 54
- City
- moreno Valley
- Vehicle Year
- i have 2 ranger
- Transmission
- Manual
Look up Fine-lines https://www.sstubes.com Just bought some stainless likes for my 1972 Chevy truck from the tank to the carb 69.00 plus 20.00 shipped look them up
Similar threads
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
