• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Starting problems


obbykdx

New Member
Joined
Sep 27, 2008
Messages
2
City
Illinois
Vehicle Year
1986
Transmission
Manual
Went to start my truck yesterday and thought the starter was still kicked in when it was running, so i turned the key off . The starter kept turning the motor over. took the key completely out of the ignition and it was still turning the motor. only way i could turn it off was onhook the battery. Any one have this happen before?
 
Never happened to me, but sounds like your switch (in the column) or a stuck solenoid - most likely the switch.
Disconnect the starter cable from the solenoid and see if that terminal is still getting voltage when the switch is off.
 
I had such a thing happen to me the other day and it was because I recentley put the starter in and the "hot" wire was touching the "switch" wire on the solenoid. When I tightened up the hot wire in rotated to the switch. Scared the heck out of me when I hooked up the batterey.

Eric<><
 
hmm. hadn't thought of that lol. I put a new solenoid on and it starts fine now, but didn't check the wires before i did, Thanks for the help tho guys.
 
replace the solenoid . its most likely stuck open, ending constant power to the starter. its happened to me on my 2.9. usually from buying cheap solenoids.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top