2.3L ('83-'97) Specs on intake manifold bolt.

[SmokEater344]

Hi all,

I just replaced my injectors for an intermittent misfire on cylinder 3, and the last jacklegs who owned my truck didnt put one of the bolts back in. This would be bolt number six...ironically, the one right next to the misfiring cylinder (after replacing the plugs, wires, coils, compression test (good) and fuel filter.

Can anyone tell me the specs on this bolt so I can look for one online (length/thread, etc)?
*Just to be clear, I dont need the torque specs, but the bolt itself.

Thanks!

 

[SenorNoob]

Probably your best bet is to hit up a hardware store carrying one of the other original bolts. Highly likely it's metric. That should help narrow it down faster.