Some fancy EB seats for my gen 1 Ranger

[e21pilot]

I got a hold of some leather power seats from a 94 EB that aren't in bad shape. The best this that bolt right into my extended cab gen1 Ranger.

Only question I have is the wiring. There is a two-wire connector at the bottom of each seat. Wondering if these wires are power and ground or two power wires? If two power wires, what is the difference between them?

 

[hank857]

one is power other is a ground. Make a harness and run to a relay for each one with its own fuse. I added seats windows etc to my 94 and then placed a fuse panel under hood and ran wires to it. Works, 1 seat kept blowing fuse so I found a shorted wire under clutch pedal arm. I guess you could run wires from just 1 relay, but I put in 2.

I forgot, if you run the fuse panel off the battery the seats will be hot all time. You can try to go to fuse panel and tap a line for when the key is on only! My windows and seats are hot all time but have never been an issue.