Skyjacker tranny mount wont line up?

[H311RzR]

Im workin on the 6" class 2 lift from Skyjacker, and as I was trying to put the new tranny mount in it is not lining up. One direction its off left to right, and if I flip the mount around its off fore to aft. Ive tried to push the tranny over, thinkin it may have moved since there is no mount atm, but it wont move far enough. Could the mount have been manufactured incorrectly or am I missing somehting, thanks for the help.

 

[holyford86]

Measurements of the one under my ranger from center of trans mount bolt to edge of crossmember: 14 1/2" Driver side 13 3/8" Passenger side