Skyjacker Coil spring dimentions

[97_4x4]

Does anyone have the specs or a link to the specs for the 4" and 6" Skyjacker coil springs? Lengths, OD, thickness, and spring rate? I used to have this info but can't find it now...

Thanks...

 

[BlackBII]

This thread has most if not all of that

http://www.therangerstation.com/forums/showthread.php?t=24045

 

[97_4x4]

feel free to delete this thread, I found the info I was looking for, let me know how to delete it and I'll remove.

thanks

 

[97_4x4]

This thread has most if not all of that

http://www.therangerstation.com/forums/showthread.php?t=24045

Thanks BlackBII, we must have been typing at the same time... I'll check out that thread.

Looks like 17" and 450PPI on the 4", 19" and 435ppi on the 6" and 21" and 430ppi on the 8".

now to start finding all the parts. plan is for 3' Body lift, probably 8" springs or 6" and the 1" spacers I still have. 5.13 gears, welded diffs front and rear, and use the 38's and rims I still have from the 97.

will be nice to get back out on the trails.

 

[BlackBII]

Thanks BlackBII, we must have been typing at the same time... I'll check out that thread.

Looks like 17" and 450PPI on the 4", 19" and 435ppi on the 6" and 21" and 430ppi on the 8".

now to start finding all the parts. plan is for 3' Body lift, probably 8" springs or 6" and the 1" spacers I still have. 5.13 gears, welded diffs front and rear, and use the 38's and rims I still have from the 97.

will be nice to get back out on the trails.

Sounds fun!

What will you be doing with the steering?

 

[97_4x4]

Steering will definitely have the extreme drop pitman arm. I am pondering the super runner steering, or trying to build my own version of it. But I didn't have any major issues on the 97 without it. Even when I was still daily driving it with 7" suspension lift, 3" body lift and 35's with 5.13 gears. It would still go down the highway just fine and still got about 15mpg. This one will never see the so, I should be ok...