Seat upholstery

[rangerred]

I have a spring starting to pop out of the drivers seat-back.
Is there some way of "peeling" off the material to get at the problem?
There seems to be a plastic piece at the bottom, that is exposed when the seat back is moved forward. Not sure if this has anything to do with removal,but it looks like a starting place. Any ideas ?

 

[ZMan]

Its likely not a spring popping through, as seats don't have springs in them. But to get the cover off....the front and back parts of the cover each have one of those plastic pieces you speak of, and they clip onto eachother, get them apart, and there will be 2 rods that hold the front of the seat cover to the foam, the rods are kept in place by hog rings, which you can cut with side cutters, the rods should slide out then. Once you've got the rods out you'll be able to pull up the cover.

 

[rangerred]

ZMan, Thanks for the tip. I'll give it shot this weekend.