SBC Headers

[constant_projecttruck]

HEY
I know a lot of people will avoid this thread just because of the chevy...but. Anyone know of any headers taht will fit in my 86 Ranger with a 305? Anyone done a 305 or 350 swap and used headers. Right now I am running stock Grand Prix manifolds that are just a straight single chamber manifold that runs right under the valve cover=they have no flow. I can raise the motor a good inch to and 1 1/2 if needed. Any ideas other than custom made? Thanks everybody.
Pics of manifolds now on cardomain if interested

 

[v-8power]

check out chvlfrk's page, it might have them on it.

http://www.cardomain.com/ride/2179883

 

[chvlfrk]

Fyi>>>

Put ramhorns on my Son's 93:

I have shorties on my 94, driverside is 88up truck and pass. side is block hugger, but it had to be modified as the collector flange hit the crossmember:

I've also known people to use V8 S10 headers.

GOOD LUCK & keep us posted...........

 

[constant_projecttruck]

thanks man for the pics...your engine is mounted a lot higher than mine. I used stock Grand Prix mounts and welded them. I love your mounts though. judging by the driver side mine is about an inch and a half lower... you can imagine my problem. Ill get a better look tommorow and try to post some pics if i can figure it out. Its supposed to be above freezing...YAY!!!

 

[chvlfrk]

Btw:

My winter project is stuffin this into either my green 94 or a black 94 I bought a couple weeks ago, and will have to run exhaust manifolds for the moment till I get some funds to have custom headers built....

Will post pics of my version of a RAT RANGER as I go

 

[chvlfrk]

Update::::

My winter project is stuffin this into either my green 94 or a black 94 I bought a couple weeks ago, and will have to run exhaust manifolds for the moment till I get some funds to have custom headers built....

Will post pics of my version of a RAT RANGER as I go

===========================================
Cleaned & fresh paint:

Additions: Weiand 7506 high rise intake, M/T valve covers (had em hangin in the garage for the last 6yrs waitin for a home) & made the motor plate...

More to come........

 

[constant_projecttruck]

and then the passenger side collector..notice the frame notch.

I got a new dress up kit for it too because I left the hood open in the rain while running for parts. oops.

 

[tlane3546]

This thing still alive??? I have a 305 in my 91 with the same exact manifolds...need a solution.