• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Running rough


Otto57

Well-Known Member
Joined
May 8, 2019
Messages
88
City
Michigan
Vehicle Year
1988
Transmission
Manual
1997 ranger 4wd 4.0 runs rough. Sometimes cranks for a long time before starting. Pulled codes. Cylinders 6 2 and 1 misfire, egr insufficient flow and O2 sensor. Has new coil pack and plugs. Any suggestions would be appreciated.
 
Hows the fuel pressure?
 
Have not checked the fuel pressure yet. Changed the filter only.
 
My personal experience whenever i encounter these symptoms it is either old plugs and wires or a pretty substantial vacuum leak… upper intake
O-rings, vacuum lines from pressure regulator and around the back of the intake? Just my 2 cents
 
Found 3 bad vacuum lines. One was to the fuel regulator. Better but still a little rough. Gonna check to see if the plugs fouled out from the fuel regulator not having vacuum.
 
I also agree with rusty…. Check fuel pressure as well. If you do a fuel pump, then always do a filter too
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top