K Thompson
Member
- Joined
- Aug 16, 2021
- Messages
- 23
- Age
- 73
- City
- Highland Village TX.
- Vehicle Year
- 2003
- Engine
- 3.0 V6
- Transmission
- Manual
Good Evening. I pulled my transmission on my 3.0l XLT (coil springs) and found the oil pan needing to be replaced. My question is do I need to unbolt the motor mounts to get the back of the engine high enough to slide the pan out the back. I also have the exhaust crossover off. I appreciate any and all advice!!
Thanks in advance
Keith (Boltman)
Thanks in advance
Keith (Boltman)