removing rear carrier

[canoeman1972]

I I take out my 7.5 track lock to rebuilt the cluthes is the there anything that I will have to reset back up or just make sure everything is in the same place?
I have the entire rear end out of the truck.

 

[rockwerks]

I I take out my 7.5 track lock to rebuilt the cluthes is the there anything that I will have to reset back up or just make sure everything is in the same place?
I have the entire rear end out of the truck.

just make sure it all goes in exactly as it was. Did you replace the carrier bearings?

 

[-Nathan-]

may want to get an install kit...and change the bearings and seals while youve got it apart. oh and dont forget additives for the gear oil...since you have a trac lok.

 

[canoeman1972]

i was thinking about changing bearings and seals and will if I do not have to set anything up with special tools

 

[AllanD]

Don't mess with things you don't NEED to mess with.

the only seals and bearings you can work on without requiring
resetting the diff are the axle shaft bearings and seals.

Just put the carrier bearings, shims and caps back where they came out of.

AD

 

[rockwerks]

Don't mess with things you don't NEED to mess with.

the only seals and bearings you can work on without requiring
resetting the diff are the axle shaft bearings and seals.

Just put the carrier bearings, shims and caps back where they came out of.

AD

X20! carrier bearing rarely need replacing just throw it back together the exact way it came out