removing after market alarm system

[jugger]

94 2.3 I was told that it has a relay between the ignition and the starter. It was installed in 94. I want to take it out because it comes on sometimes without being set and I can't get it off and the "kill switch" leaves me stranded. What do I look for and how would I reconize the relay? Thanks for any help. Plus will I have to take out the ignition? Thanks again.

 

[88 danger ranger]

wow ok well if its what i think it is it has to run through the starter solenoid on the pass side of the engine compartment. will it crank when you kill it? if it doesnt there are 3 wires on the starter solenoid one runs directly to the battery its a big wire and the other big wire of course runs to the starter but there a little wire that connects on to a little post on the solenoid thats ur ignition wire trace it all the way to the fire wall and note the color to check under the dash the relay has to run through that wire..... hope this helps if your not understanding what im talkin about, pm me ill go into more depth