Ranger Sport Honduras official build thread

[TheTopher]

Looking at those bolts it seems like you only have 1.5 inches of thread on them. If you need them shorter you could always add in washers to shorten it up, but if you need to actually trim them you'll be SOL without a really heavy duty die.


Stop being lazy and start working! This should be done by Sunday at the latest!

 

[Ranger Sport Honduras]

Looking at those bolts it seems like you only have 1.5 inches of thread on them. If you need them shorter you could always add in washers to shorten it up, but if you need to actually trim them you'll be SOL without a really heavy duty die.


Stop being lazy and start working! This should be done by Sunday at the latest!

i only had 2 choices, 7" long or 5 3/4" long, and those are obviously too short.
i hope i can make em work with a couple washers, if not ill find a way lol

and im doing this on my cousins garage, and he doesnt work on sundays lol, so i have to wait until monday

 

[TheTopher]

and im doing this on my cousins garage, and he doesnt work on sundays lol, so i have to wait until monday

Lies! You're just lazy! Now a day later it's still not done.

Stop showing baby pictures of yourself and finish your truck!

 

[Ranger Sport Honduras]

hahhahahahaha he had a last minute thing yesterday. i know it sucks, but we area doing it today. trust me today is the day

 

[Ranger Sport Honduras]

so here it is
i still need to raise the front bumper. the steering works fine so i think i wont need an extension, the tank hoses work good too. the shifter has a nice height, but i think ill have to add an extension cuz it bumps on the tranny plate or something in the cab floor when i engage 2nd, 4th and reverse.

i couldnt remove the bed bolts with the torx head, so i welded some bolts on top of em to remove

i stared on the bed instead of the cab lol

bed spacers

i need a set of 31"s now to fill this

cab spacers

the front blots were a pita to remove, so we torched em

i still need to raise the bumper.

 

[Hopman]

Cool stuff RSH!

 

[Ranger Sport Honduras]

thanks man, ill try to get better pics tomorrow. it wasnt that hard tho.

 

[K.Strong]

Lookin good man. How long did it take to install?

 

[Ranger Sport Honduras]

4 or 5 hours maybe, we were working and chatting at the same time lol
the header panel bolts were the worst part.
i hate Ford for those bolts haha

 

[fordman4x492]

sweet

 

[Ranger Sport Honduras]

thanks man lol

 

[MountainMike]

Right on RSH, keep up that Honduran engineering that never ceases to make badass things out of simple supples

 

[TheTopher]

Looking good mate. I also noticed your cousin's garage looks an awful lot like a backyard

You're the shadetree Honduran!

 

[Jay'94]

Torchin & weldin on them springs, Guess you had no clue they're heat tempered.. Hacksaw, Bandsaw, Sawzall, Jigsaw would be a much better choice and work a lot better on them body mount bolts too.. When ya torching them fenders about 3-4" with some fender flares??
Anxious to see how long before they break, sag or bend into the shape of a pig's you know what...
Header panel bolts and a body lift?? I'm really confused now.

 

[Ranger Kip]

likin the lift dude!