Ranger beds

[KWAD RCR]

Just wondering if anyone knows, without guessing, if a 2003 ranger long bed will fit on a 1993 with a long bed. Can't seem to find a pic of the 2003 to seee if the body lines are the same. Hell, wheelbase might even be different.

 

[Wicked_Sludge]

body lines and wheelbase are the same. itll bolt on.

 

[KWAD RCR]

body lines and wheelbase are the same. itll bolt on.

THANKS

 

[scotts90ranger]

the tail lights are different, you will need your old headlights, so just be prepared, some tweaking might be involved

 

[exbass94]

the tail lights are different, you will need your old headlights, so just be prepared, some tweaking might be involved

The taillights are different, but any taillights from 1993-2009 will bolt right in, so he can still use his current taillights, or whichever ones he wants. The beds themselves are also EXACTLY the same from 93-2009, so the body lines will be exactly the same, and there should be no tweaking necessary.

 

[KWAD RCR]

The taillights are different, but any taillights from 1993-2009 will bolt right in, so he can still use his current taillights, or whichever ones he wants. The beds themselves are also EXACTLY the same from 93-2009, so the body lines will be exactly the same, and there should be no tweaking necessary.

Thanks for all the info. I found a bed on craigslist and the one I have now is kinda beat up. Now I just have to decide if I will get the bed or just get flared bedsides. Makin prerunner and will pull the sides if I get that 2003 bed.

 

[brian0206]

im in need of a driver side bedside so if you pull will pay. been looking for one forever. ii see you are in central cali , im san diego, so depending on where you are i will be more then happy to come get them.

 

[rangerbum]

The taillights are different, but any taillights from 1993-2009 will bolt right in, so he can still use his current taillights, or whichever ones he wants. The beds themselves are also EXACTLY the same from 93-2009, so the body lines will be exactly the same, and there should be no tweaking necessary.

+1, lights bolt in place. I, personally would opt to keep the newer ones if possible. I think they have a pretty clean look to them.

 

[bmxryder]

Thanks for all the info. I found a bed on craigslist and the one I have now is kinda beat up. Now I just have to decide if I will get the bed or just get flared bedsides. Makin prerunner and will pull the sides if I get that 2003 bed.

glass bedsides are definantly way cooler than pulling the bedsides. i put fiberglass up front and you barely notice the rear being pulled.

 

[94 lngbd]

I thought I heard that the newer beds 06-09 had a different bolt pattern to them?

Also KWAD RCR is wanting a long bed, Do they make the fiberglass prerunner bed panels for the long bed?

Also BRIAN0206 wants KWAD RCR to contact him if he removes the stock bed panels. Brian isnt your truck a short bed?

I know for 100% that the 2003 beds will bolt onto the 93+ years cause its a 2003 bed thats on my 94 Ranger.