What is the best way to remove the solid mounted quarter windows from a 96 Ranger so I can install pop outs?
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Quarter Window Removal
- Thread starter explorerhavok
- Start date
- Joined
- Apr 30, 2008
- Messages
- 2,195
- Age
- 33
- City
- Lindale, Tx.
- Vehicle Year
- 2005, 1989, 200
- Transmission
- Manual
take off the plastic trim around the window there are small nuts on each edge of the window, take those off, and have someone on the other side to catch it and it should just pop out
p.s. dont do what i did and cut off all of the rubber seal around it thinking it was just sealed to the metal
p.s. dont do what i did and cut off all of the rubber seal around it thinking it was just sealed to the metal
Loanranger
Well-Known Member
- Joined
- Aug 6, 2007
- Messages
- 842
- Age
- 44
- City
- Puyallup, Wa
- Vehicle Year
- 1989/
1972
- Transmission
- Manual
Like he said^^^^^. Use your feet or flat hands and push evenly. It's really easy. You'll want to put some clear packing tape over the stud holes once you get the old one out, and before you install the pop outs. You'll need a couple rivets for the hinge side, and your screws and j-clips for the latch side.
Thanks for the info, I was thinking they where just held in with the rubber, good thing I didn't start cutting!
- Joined
- Apr 30, 2008
- Messages
- 2,195
- Age
- 33
- City
- Lindale, Tx.
- Vehicle Year
- 2005, 1989, 200
- Transmission
- Manual
glad we could help
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
