Welcome Visitor! Please take a few seconds and 
Slim
Well-Known Member
- Joined
- Nov 19, 2008
- Messages
- 442
- City
- Ontario, Canada
- Vehicle Year
- 1997 + 2003
- Transmission
- Automatic
It appears that the front factory bump stops on my truck have seen better days. I can't quite get anything on the head of the one on the driver's side.
Is it safe to just use an air chisel to remove the old ones and replace with new (shorter) ones? I don't think the stock ones are used in a way to help keep things attached to the frame, but ..... gotta ask to be sure.
For those that know please inform me.
Thanks!
(and no, i'm not interested in cutting the stock ones, but thanks)
Is it safe to just use an air chisel to remove the old ones and replace with new (shorter) ones? I don't think the stock ones are used in a way to help keep things attached to the frame, but ..... gotta ask to be sure.
For those that know please inform me.
Thanks!
(and no, i'm not interested in cutting the stock ones, but thanks)
