Problem

[dangerranger302]

Well long story short I bought a 91 4x4 with lift for a cheap price..Well seemed to be in good shape for its age and what not..Well drove it home and noticed the truck was all over the place.. So changed out the inner and outer tierod and some other stuff..Well this didnt do much, so I looked close at stuff and noticed the cheap out on some bushing and some were just trashed.. The bushing on the driver side beam is gone and looks as if they used a differ bolt and washer combo and other stuff.. Well got to looken more and saw the motor crossmember was cracked on the front side well I looked at the backside and its cracked all the way threw..Iam not sure how its holding and why it hasnt folded in yet.. My q is has anyone dealt with this before and will I be able to brace it up with some metal and weld it all up? I called a collison place and they said to bring it by and see, but i was hoping they can put it on the frame straighner and weld it back up.. Sorry for such a long post, just need some outside advice

 

[danger_ranger05]

I would try to get your money back for the truck, who knows what else could be wrong with it...and besides, the sooner you try to get your money back, the more chance of success you will have. Ive taken several law classes while in college so if ya need some advice on how to go about this let me know...how all works out.