Power window chanel rollers

[TexCaliBII]

Anyone know where to get the plastic rollers for the power windows? I've got the doors off a 90 BII and the rollers are worn out. Pretty sure I can get them through the Ford parts counter but that might be a tad pricey. I can'
t seem to find them on the net. Anyone found replacements that worked? Thanks!

 

[budro]

Are you talking about the 3 white plastic rollers inside the power window motor regulator? If so most auto parts stores have them in stock.

 

[unoleisu]

You might try LMCtruck.com I'm not sure exactly which parts your talking about, but they have a power window kit, on pg 95, and individual parts on pgs 17 to 21. (catalogue is online)

 

[johnsongang]

Anyone know where to get the plastic rollers for the power windows? I've got the doors off a 90 BII and the rollers are worn out. Pretty sure I can get them through the Ford parts counter but that might be a tad pricey. I can'
t seem to find them on the net. Anyone found replacements that worked? Thanks!

I just replaced both sets on my 90 B2 this week. Both NAPA and Autozone carries them for 8-9 bucks. Ask for the power window gear plugs, P/N 74410 by Dorman or Autolite. Make sure you take out all the broken pieces, there are lots of little chunks left in the metal and plastic gears..DO NOT USE metal slugs or 5/16" nuts as you may see in other posts, they will eventually tear up your motor.

 

[TexCaliBII]

Sorry I should have been more detailed at the beginning. What I was looking for was the plastic regulator rollors. I have since found them on LMC. Good to know about the motor gears though. Thanks all!