Power Steering Fitting Sizes

[t120r]

Does anyone know the size of the power steering fittings on the box and pump (1990)? I want to make custom lines to convert to hydroboost. I'm also 3500kms away from my truck right now, So I can't look myself.

 

[Destroyer000]

3/8 brake line fitting threads right in.. uve used that line to replace the return line and what not.

 

[t120r]

Thanks for the info. I know the pressure port is a different size than the return. If I can find that out I can pick up some fittings to make the custom hoses.

 

[ecablarn]

Fyi, if you didn't already find this out.

Autozone info on pressure hose ends for 92 Ranger: End 1 is at pump, End 2 at gear

End 1 Diameter: 0.3125 in.
End 1 Type: Male inverted flare
End 2 Diameter: 16 mm.
End 2 Type: Swivel O-ring

Autozone info on Return line hose ends for 92 Ranger: End 1 is at gear, End 2 is at pump

End 1 Diameter: 0.375 in.
End 1 Type: Male inverted flare
End 2 3/8 hose and clamp

 

[t120r]

Thanks. I had just picked up some metric fittings this past weekend and found out that some are not metric. What a waste of time. But this really helps. Thank you very much. Soon as I figure out my rear vibration problem, I will be converting to hydroboost.