PlumCrazy's Build

[mmguy]

Thanks. May have to check it out. See you have a 96 also. I have a 96 that is stock 2wd that I have for about year.

 

[PlumCrazy]

Thanks. May have to check it out. See you have a 96 also. I have a 96 that is stock 2wd that I have for about year.

Yeah, I convinced my GF to get a Ranger. It is a nice little truck, Black short wheel base 2wd. All I have done to it is put power mirrors and splash 5-spokes on it. It had the traditional rotted hangers and shackles when we bought it. I got the guy selling it to knock 500 bucks off for the rusty hangers and tank straps. I had the bed off and the hangers cut off less then 2 hrs after we bought it.lol

 

[1994Rangerxlt]

how much would you want to put my 3.0 tranny gears in my 4.0 shell??? well is it really worth it do u even notice a diffrence??

 

[PlumCrazy]

how much would you want to put my 3.0 tranny gears in my 4.0 shell??? well is it really worth it do u even notice a diffrence??

Its pretty noticeable in low range and taking off.

If you can find a way to get it here I would do it for you, but shipping on something that heavy would be killer. PA is only couple hour drive though

 

[Flash Gordan]

PA is only couple hour drive though

Depending on where in PA he's coming from. My great aunt used to live in Wooster before she passed away a couple years ago. And the drive from south jersey took six hours to get there. And that was cruising right on out the turnpike.

 

[PlumCrazy]

Depending on where in PA he's coming from. My great aunt used to live in Wooster before she passed away a couple years ago. And the drive from south jersey took six hours to get there. And that was cruising right on out the turnpike.

It takes around two hrs to hit the PA border from Wooster, and it takes a little more to hit the border where my shop is in from Canal Winchester (little SE of Columbus). Which ever is closer would work I am in Canal every weekend.

 

[1994Rangerxlt]

ya if i get a job then hell ya id come on a road trip with need money for go go juice

 

[Kona]

I really like the work you have done....your truck is so stealth! It looks like a normal lifted Ranger but is sooo built!

 

[PlumCrazy]

I really like the work you have done....your truck is so stealth! It looks like a normal lifted Ranger but is sooo built!

Thanks.

 

[1994Rangerxlt]

U have 6inch coils on the front right? im lookin for a set cause my truck has 6 inch lift in back and 4 up front and it sits mad ass high. did u see u had ur coils listed for sale??

 

[PlumCrazy]

I have 4" coils with 2" spacers now, but I want to get 6" coils and run a 1" spacer.

 

[1994Rangerxlt]

when i get that ill buy the spacers off u

 

[PlumCrazy]

when i get that ill buy the spacers off u

They are homemade steel spacers. I will probably just cut them down to 1" when I get 6" coils or leave em 2" and run 6" coils if my RA bushings will let me.(I dont want to make new RA mounts, so I will go as high as my current setup will allow me too without stressing the bushings.)

 

[1994Rangerxlt]

what did u do to extend the bolts for coil hold downs

 

[PlumCrazy]

what did u do to extend the bolts for coil hold downs

Didnt have to. I made the spacers as tall as I could and still allow the nut to thread on until the stud was flush. They may only be 1.75 inches or so I dont remember.