Pitman arm question

[B89Ronco]

Hey guys I have an 89 B II siting on a 3" suspension 3" body. I still have the factory pitman arm. What I need to know is if a 4" pitman arm will work or if it's too much of a drop. I'm still a little new at this so I'm not really sure. Thanks!

 

[Sasquatch_Ryda]

A pitman arm for a 4" lift should be about right, it isn't actually dropped 4 inches, about 2" IIRC.

 

[BlackBII]

Yeah, should work out just fine.

 

[4x4junkie]

Skyjacker pt# FA400 should work fine with your 3" lift. If you ever decide to go to a 4" or 6" suspension lift however, their FA600 pitman arm would work better with those lifts.