Pitman Arm for Manual Steering Box

[captndiet]

If you have one, I really need a center-to-center measurement from the pitman shaft to the tie rod.

May have found an off the shelf pitman arm that will work if the center-to-center is correct.

Thanks for your help.

Jeff

 

[racsan]

looks like 4-3/4”

 

[captndiet]

Kool !!

The pitman arm I have found is 5" c-c.

I will order one and see if it will work.

Thanks for the input and effort.

Jeff

 

[alwaysFlOoReD]

Should work fine. Somewhere on site is a pic comparing 2 4x4 arms I have. One is almost an inch longer than the other. Both came off early rangers. The longer one will give quicker steering response which is the one I used in my low buck race truck.