Pics Of 2wd Ranger Lifts!

[mp3deviant721]

Girls go crazy in Waikiki for my ranger...
*4.0L with AEM intake, jba headers/full exhaust
*tinted windows 35% in front 5% in back
*32x11.5x15 pro comp all terrains/ rock crawler rims
*5.5 super lift
*after market tail lights and corner lights.
*full alpine system with 12" kicker
*custom Denver Broncos sprayed bed

I think in about a year, mine will look similar to this. Got any more pics?

 

[khast2010]

This is just something I did on paint, but its a 2wd ranger xl with roughly 6 inches of lift and 31" tires. ( the tires are gray just so you can see them better)

 

[Bankrupt]

'98 2wd XLT
206,000 miles
Exterior: Black UWS low profile toolbox, Removed mudflaps (about 15 minutes after this picture was taken)
Suspension: 2" blocks in the rear, saggy coils in the front.
Wheels and tires: 15 inch wheels and 31x10.50x15 Uniroyal Liberator A/T

Looking for Ideas to make it look better. Ill probably install some cheap little coil spring helpers to level it out. Id like to add some lights or something up front. Anything to make it look higher is great. I would remove the valance, but I dont want my radiator exposed. All ideas are welcome

 

[Ranger Sport Honduras]

looks nice man, id get some coil spacers and maybe a bodylift fot it.
pleace dont take the valance off. its cool like it is.

 

[Bankrupt]

Thanks , my only setback with spacers is that ill need an alignment and im very limited on money for now. Hell, honestly ill probably just leave it alone. I want it level, but i dont want to put in the time and money for spacers, thats why i decided on those little "spring boosters". I only need an inch or so.

And the valance will stay, but i may do away with that ugle plastic thing under the radiator. I do want some kind of lights or bars to beef up the front a bit

 

[mp3deviant721]

Stay away as far as you can from those spring boosters. They can fall out causing all sorts of horrible issues. If you want a cheap lift, look at RSH's build thread. I think he can elaborate on how he lifted his truck.

 

[407Link]

Sorry for the bad pic I don't have a good camera but it just has a t-crank on 31's

 

[Z3CHYD]

here's mine. 86 Ranger 2.9L 5-speed longbed 2wd.
4 inch rough country suspension lift
30/9.50 tires on chrome junkyard rims
Cherry bomb extreme dual exhaust/spectre CAI blah blah blah
stereo system that'll shake the mirrors pretty good hehe

after a bath

 

[Northern]

Here she is..

1995 EXT cab 2.3L Manual trans, shortbed.
33/12.5/15 BFG's wrapping a set of Cepek D1's
The lift is a Camburg 5.5 with 3" ext'd beams.
Its all suspension, not a single lift bracket

 

[Z3CHYD]

Here she is..

1995 EXT cab 2.3L Manual trans, shortbed.
33/12.5/15 BFG's wrapping a set of Cepek D1's
The lift is a Camburg 5.5 with 3" ext'd beams.
Its all suspension, not a single lift bracket

nice! i bet that set you back a pretty penny

 

[Northern]

@ Z3CHYD

It put a dent in the pocket book, but its worth it.
knowing that I got a quality made setup.

 

[Z3CHYD]

@ Z3CHYD

It put a dent in the pocket book, but its worth it.
knowing that I got a quality made setup.

did you gear it at all to pull those 33's? My friend has a 91 ranger with 33's an a 2.9 and it dog's uphill lol

 

[Z3CHYD]

here's another pic of mine sitting next to my friends 91 4wd with a 6 inch skyjacker lift. mines 4 inch rough country.

 

[Northern]

Nah, I didnt see the reason to spend the extra funds on the 7.5 when ill be replacing in soon with a 8.8

 

[killj0y]

Don't mean to hijack thread or anything just plenty of good posts here from people who have encountered my problem.

Any advice for a budget lift? I'm looking to lift mine a bit to get a little more articulation to clear ditches and the like, nothing too serious, but I definitely want to lift it! I've just been having a hard time finding any decent parts or kits, outside of overkill pre-runner type stuff. I want suspension not body though, any advice? Don't mind having to do the washer set up, I only care that it be stable so prob no coil spacers or the like. I already have 31s on it stock.