Photo's Needed [Please Read] (Update 11/1/08)

[The_Dealer]

opening rear window on my b2

ttb flex(mildly modded)

you didnt ask for this but theres alot of questions come up about it.

before duraspark conversion

after duraspark with stock carb and metering block

edge front conversion on my 00

stock ranger beside my 00 with about 2.25" mid travel, custom deaver coils, btf uniball uppers, deaver rear pack(camber is fine, just how its sittin with no sway bar)

 

[The_Dealer]

 

[nikole]

Ha ha ha ha...

I'll get some side view with the rear window open tomorrow. I've got some other pics I'll post as soon as I can find them.

 

[Andres629]

Jim, are you still in need of pictures. I got heaps of parts laying around and some other miscellaneous crap... haha.

 

[--weezl--]

i'll post up what i got! i've got LOTS more pics of my truck i can post up, and most likely larger versions of all the pics of my truck i posted here

broken spider gears in a 3.55 trac loc 31 spline 8.8 f-150 diff (should be the same as what you would see on the explorer 31 spline 3.55)

stock 07 fx4 level II

3" bl, torsion crank, valance removal, "custom" front end and 33x12.5" km2's i THINK these pics also have me with my belltech 6400's and expo leafs

3" BL custom body work (paint, grill, bumper) 31x10.5 bfg ko tires:

same as above, but with 33x12.5 km2's

fx4 offroad left, fx4 level II right

07 fx4 level II

stereo bezel: i can take a shot of the whole dash, with the stock head unit back in, if you like, i've got an aftermarket one right now, but it would take 5 minutes to pop it out and put my stock back in...

explorer sport trac with 3" BL and metric tires (works out to about 33x10.5)

d35 in place with cross member blocking it (stock)

i forget what year ranger, i can look it up for you if you like these pics though:

2010 traction control button

 

[Observer]

Shot of an 8.8, all prettied-up

I can get more shots now that its installed.. I thought id grab one before it went in.

 

[deadRaven]

Definitely could use some clean pics of that B2. Especially of some full shots with the rear window open and closed.
__

 

['91 ranger xlt]

I know this is a pretty old thread but I have a 1991 brochure if you need pictures. I also have the paint chip from that year. If anyone wants to buy one you can get them on ebay, Im pretty sure they have every year of ranger brochure on there.

 

[bigtruck94]

My 1994 ford ranger
Stock

Non stock

 

[Raceranger]

I allso have a 04 ranger fx4L2
100% stock right down to the Alcoa wheels

I know that are somewhat are was it took my dealer almost 2months to find me one when bought new

 

[RB7 Ranger]

98 xlt 2wd lifted

Lots done, explorer rear end, chevy 64s, 4 in spindle, bed sides pulled and clearanced, fiberwerx fenders , 2 in BORA spacers, 3.0 5 speed 4:33 gears

 

[airbourneranger]

2011 XLT ext cab. 4.0 5 speed auto. Lowered 4/5 245/45-18 and 275/40-18. Bullet Wheels. 2004 Grill, ( I think it looks better ) 2003 Mustang Hood Scoop, QA-1 front coilovers, Belltech rear shackles. Katzkin leather seats and center arm rest.

 

[broncc]

I know this wasn't requested but I have yet to find an image comparing the M5OD bell housings.

4.0L OHV - 3.0L - 2.3L DOHC (2004)

 

[Lefty]

Heres a couple pics of my 89.

Very nice!

 

[Ranger850]

2001 Ranger EDGE Rear end. Open 7.5" 3.73's with factory lift blocks

factory lift blocks highlighted