Parts Dealers?

[Twunny3Hunnert]

It seems the regulars like Jegs and Summit aren't that much of help.

Anyone have some suggestions for parts dealers, preferably online so I can check prices and whatnot from home?

Looking for performance transmission stuff, clutch, slave cylinder and some engine bits.

Running the 2.3 with a 5 speed.

Thanks

 

[cammeddrz]

RACER WALSH is pretty hardcore into 2300 stuff

 

[scotts90ranger]

For transmission simply get Centerforce part numbers CFT360032 and 381009, 2 years ago when I was getting those for my truck they didn't have that combo in a kit, it's the pressure plate with weights and their stock replacement friction disk which when I was asking about a new clutch that is what I was pointed at and it works AMAZING, it's simply a clutch switch, you can slip it at low rpm for a little feathering but once you rev up it grabs like a mofo... and I'm putting 12psi to my engine... everything in my transmission is stock except for that... This combo is VERY drivable, I've heard the puck type clutches aren't and I am very happy with this setup

as for performance engine parts, Racer Walsh and Esslinger are about all you have for choices, myself I went stock parts with a stock turbo engine, I have about $1000 in my engine setup for about 170hp I think, and everything is available off the shelf (finding the right shelf is another story...)

 

[Twunny3Hunnert]

For transmission simply get Centerforce part numbers CFT360032 and 381009, 2 years ago when I was getting those for my truck they didn't have that combo in a kit, it's the pressure plate with weights and their stock replacement friction disk which when I was asking about a new clutch that is what I was pointed at and it works AMAZING, it's simply a clutch switch, you can slip it at low rpm for a little feathering but once you rev up it grabs like a mofo... and I'm putting 12psi to my engine... everything in my transmission is stock except for that... This combo is VERY drivable, I've heard the puck type clutches aren't and I am very happy with this setup

"RACER WALSH is pretty hardcore into 2300 stuff"



Damn, thanks guys. Just about exactly what I was hoping for with the part numbers.