Nuetral Safety Switch

[247charlie]

Alright, so my automatic went out and I decided to swap it to the manual that I had in the truck in the woods. I drive a 1988 stx with the 2.9 4x4 eletronic T case. The manual is an fm146. Now, I've read two other treads on this bad boy and they all say that the auto computer should work if I cross the pink and red/lght blue wire. I have found the red wire. My question is, where is the pink wire and where do I jump them at? I cannot find a pink wire in the harness to the computer on the passenger side in the cab. This is where I found the red/light blue one. Any suggestions?

 

[247charlie]

In case anyone's curious, It's the yellow wire on this particular truck. I was able to jump it right at the 5 pin connector that goes to the sensor. Now all I have to do is wire in the reverse lights.