ZchPro
Member
- Joined
- May 9, 2012
- Messages
- 6
- Vehicle Year
- 1999
- Transmission
- Automatic
Ok so I'm getting ready to fix the ranger and I just want to make sure I have the right part name before I order it from a junk yard in kansas and can't return it.
Is the arrow in the picture below pointing to the upper intake manifold or is it the lower?
I'm referring to the part that connects/bolts to the blue thermostat housing.
As stated this is for ordering a part so please no jokes.
You can bash me for the noob question later
the pic is of an 07 vulcan and mines a 99 but as far as I know there's no difference in the layout as far as the manifolds are concerned.
If it helps the hole (the reason its being replaced) in the manifold is an inch or so from the t-stat housing. That's what I need to replace
Is the arrow in the picture below pointing to the upper intake manifold or is it the lower?
I'm referring to the part that connects/bolts to the blue thermostat housing.
As stated this is for ordering a part so please no jokes.
You can bash me for the noob question later

the pic is of an 07 vulcan and mines a 99 but as far as I know there's no difference in the layout as far as the manifolds are concerned.
If it helps the hole (the reason its being replaced) in the manifold is an inch or so from the t-stat housing. That's what I need to replace