Newbie Bronco II questions

[4X4 Pinto]

Hey Guys, This site is much better than a Ford manual. I just bought a super nice Bronco II XLT with no rust. But it was in a minor fender bender and I need to replace the right fender, hood, complete headlight assembly, and the bumper. Are the parts all exactly the same from 89-92 Rangers, Bronco IIs, and Explorers? Also would like to replace the grill with a explorer grill. Will they fit?

 

[Bronco_Chuck]

im not sure if the explorer body parts are the same but the grill will fit. and the body parts will all fit from the 89-92 rangers and B2's.

 

[Tony Raine]

all of that stuff can be sourced from rangers.

grill and headlights (but not core support) are all you can get from an explorer

 

[TexCaliBII]

Tony,
If your BII is an 89 or 90 then the headlight bucket and grill from an explorer will fit but the fender will have to come from a same year BII or Ranger as the 88 and below BIIs/Rangers have different front sheetmetal. The hood and bumbers are the same on all years of the BIIs and Rangers up to 92 I think.

 

[unoleisu]

Go to LMCtruck.com and look at thier catalogue. You can order a free one as well. It works as a pretty good cross referance for this type of issue. You can buy the parts from them, or just use it as a guide for what you need to look for, or can use.
Good luck!

 

[94xlt4.0]

the grill and headlights are the same for 89-90 bronco 2, 89-92 ranger, and 91-94 explorer. the fenders and hood for the 89-90 b2 and 89-92 ranger will work for sure. nothing else will work from the explorer.

 

[greasemonkey6886]

the hood from a 91-94 explorer will fit a 89-90 BII and 89-93 ranger as well as the headlights and grill