New with Mazda

[babybigfoot]

Thanks for letting me join. You're site has already been a life saver for me so I thought I would join to see what else I've been missing out on. Who ever found and posted the front end exploded view of the 96 TTB 4x4 front end by Spicer has been a great help. Only problem I'm having now is locating the parts. Not as easy a task as I thought it was going to be. Still searching for parts. Redoing all the bearings and seals in the front end isn't as easy to find as I thought.
Thanks for having me

 

[DannyG]

Welcome to TRS! You might want to try rockauto.com or lmctruck.com for the front end parts.

Most if not all mechanical and electrical parts are the same between the Ranger and the B series.

DannyG

 

[RonD]

Welcome to TRS


This is a good page to Bookmark: http://www.therangerstation.com/how-to/

In the AXLE section is this article about IDing which front axle you have: http://www.therangerstation.com/stock-ranger-specifications/ford-ranger-4x4-front-axles-1983-1997/

1996 Ranger could have either Dana 35 or Hybrid, not sure how that applies to Mazda B-series

In that same AXLE section are Rebuild articles with part numbers

 

[babybigfoot]

yes that ID section is what I was referring to in my post. That was very helpful with part #'s and all. Now if Dana would still carry the stuff. Thank you though

 

[Jim Oaks]

Welcome!