Welcome Visitor! Please take a few seconds and bonedoc
Well-Known Member
Hello there everyone,
Just joined have been on the site many times.
Have an '85 bronco II 4x4 with 2.8L. The motor is a jasper rebuilt with a recently rebuilt A4LD trans. Truck has a 4" rough country lift with 31 inch cooper sst tires. Motor has headers and a 2 and 1/2 inch exhaust. Currently looking at swapping the carb for a holley 350 two barrel, with the electric choke conversion and throttle position switch. Anyone had any luck or tries with this?
Next mods will be a james duff 5 1/2 inch stage 3 lift, then 32 or 33 inch tires
Just joined have been on the site many times.
Have an '85 bronco II 4x4 with 2.8L. The motor is a jasper rebuilt with a recently rebuilt A4LD trans. Truck has a 4" rough country lift with 31 inch cooper sst tires. Motor has headers and a 2 and 1/2 inch exhaust. Currently looking at swapping the carb for a holley 350 two barrel, with the electric choke conversion and throttle position switch. Anyone had any luck or tries with this?
Next mods will be a james duff 5 1/2 inch stage 3 lift, then 32 or 33 inch tires
