New Project Truck, dana 60, 14 bolt, 44s

[Hondafreak08]

when u said 14'' of lift,,, i was thinking biggaytruckland.... but it turnd out amazing

 

[1badexplorer]

beautiful truck. I did notice you have the stock Warn hubs on there, you're still running 30spline outters? Also, what orbital valve are you using?

Yes, so far I haven't had any problems with the 30 splines. I have the 35s but why fix it if it isn't broke? I'm not sure on the manufacturer of the valve its a small square valve off a yale forklift. My pervious valve was made by Eaton but this on is completely different.

 

[1badexplorer]

Pics from other trail rides

 

[86 slo-vo]

love it

 

[MEAKIN]

nice bronco!!

 

[1badexplorer]

love it

nice bronco!!

Thanks Guys

 

[TheBeast]

That is one badass bronco man. If I saw that rolling up on me i'd just stop and stare. lol

 

[ozziemo27]

F*n sick man, rebel flag adds a nice touch =)

 

[1badexplorer]

Ok, been a while since I updated this: The doubler works great. I added a rear winch just because I had an extra laying in the garage. I built a high steer setup so now my cylinder and tierod are all hidden above my leafs. I flipped the U bolts on the front axle also. No more getting hung up on them sticking down. I've been running it hard lately but now I have a collection of broken front stub shafts. Everytime I break the stub shaft it ruins the spindle, lock out, wheel bearings, and bearing nuts. I've used up all my spares next time I've going 35 spline chromos. I already made a set of drive flanges to fit them.

 

[Bennybooster]

Sounds awsome post some pics when ya fix it

 

[NMB2]

if you want some warn premiums Ill give you a good deal

 

[nate09]

absolutely amazing, talk about the ultimate EB.

 

[bronco2guy]

Love the stuck pic with the 2 girls standing up in back, thats what its all about, good time with friends and taking good looking girls along to get muddy!!

 

[1badexplorer]

Yes, It's been a fun truck so far. I've broken alot of D60 recently. such as: 3 hubs, 3 stubs, 1 inner, 1 locker, and a drivers knuckle. I'm know running 35 spline Chromo shafts, and drive flanges. I bought a kit to weld braces onto the knuckles. I broke right around the kingpin. I also just twisted off the tailshaft in the NP203 Sunday. I got a new billit shaft on the way though. I'm also in the process of putting together a 400 hp 351W for it.

 

[BONES]

SICK!!!!!!

She looks like a lot of fun man!!

Good job!