Neutral safety switch?

[CarsonChris]

I have tail lights working. Grounded the red/pink and now I have reverse lights. No brake lights, no turn signals.

 

[RonD]

Have a look here: http://www.therangerstation.com/tech_library/EDiagrams/files/Diagram_turn_stop_hazard.JPG

On the right top you will see the Brake switch, it passes power to the Multifunction switch which then passes that power to the brake light bulbs.
This is the turn signal switch as well.
So your issue will be in that switch or it's connector(assuming you have tested for power at the brake light switch).
This switch passes power to brake lights and turn signals as needed.

Head lights and tail lights don't use this switch, high and low beam relay does and horn is on the same connector, try these