Welcome Visitor! Please take a few seconds and ranger92
Well-Known Member
So I have a 92 with the 3.0l and I've finally gathered the parts to install a 60mm tb off a duratec 3.0. I have the upper intake off a 98 3.0 and the tb came off an 01 escape. The problem is there is nowhere to put the iac and iat sensors on this new intake
. for the iat I know I can just drill and tap a hole in the intake but where am I supposed to put the iac sensor. anyone who has done this swap some help would be much appreciated
. for the iat I know I can just drill and tap a hole in the intake but where am I supposed to put the iac sensor. anyone who has done this swap some help would be much appreciated
