Welcome Visitor! Please take a few seconds and 
- Joined
- Aug 6, 2007
- Messages
- 5,351
- State - Country
- GA - USA
- Vehicle Year
- 1999
- Vehicle
- Ford Ranger
- Engine
- 5.0
- Transmission
- Automatic
- Total Drop
- few inches
- Tire Size
- ~30"
I have a spare set of Ranger wheels sitting here with good tires on them, and I have a car with the same bolt pattern that needs tires. I've checked and believe that the wheels will fit no problem but I'm running into an issue with the mounting. The Ranger these wheels came off of used this style of lug nut:
I'm assuming here that the center caps clipped over the flange on the nut.
The car I'm putting these wheels on has metric studs, M12x1.50. I'm trying to find those style lug nuts in this thread size, but so far have had no luck, and I don't want to try changing out all of the studs to the standard size.
Any help would be appreciated.
I'm assuming here that the center caps clipped over the flange on the nut.
The car I'm putting these wheels on has metric studs, M12x1.50. I'm trying to find those style lug nuts in this thread size, but so far have had no luck, and I don't want to try changing out all of the studs to the standard size.
Any help would be appreciated.
