Welcome Visitor! Please take a few seconds and sonofcar
New Member
- Joined
- Nov 13, 2009
- Messages
- 1
- Vehicle Year
- 1989
- Transmission
- Manual
i got a 89 ford bronco 2 fuel injected 2.9L it starts fine when its cold but when you try to start it after its warmed up it wont fire. it cranks and has spark and is getting fuel.the timing is correct and i replaced the module. sometimes if i crank it for a while and hold the gas to the floor it starts but runs rough.doing this wont start it all the time. any help would be appriciated
