- Joined
- Apr 13, 2009
- Messages
- 15,102
- Vehicle Year
- '06, '11
- Engine
- 3.0 V6
- Transmission
- Automatic
I believe spec pressure for 94 is 40psi. 30 psi should run. But if the volume isn't there....
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Need help with 94 ranger wont stay running.
- Thread starter CelebrityBob
- Start date
CelebrityBob
Member
Good to know!
- Joined
- Apr 30, 2024
- Messages
- 862
- City
- Moncton NB
- Vehicle Year
- 2005
- Engine
- 3.0 V6
- Transmission
- Automatic
There are diagnostics you can do to determine if the regulator is the problem. Step one if the pump is running is to check pressure at the rail.
I'll be happy to run through the rest either before or after you replace the regulator. Good luck!
I'll be happy to run through the rest either before or after you replace the regulator. Good luck!
Similar threads
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
