need advice on putting oem fog lights on my Ranger

[red Ranger (Sarah)3.0L]

Hello ! so i have a interesting one once again for yall i want to give my 03 Ranger with no fog lights... fog lights BUT! there's a catch im doing a 98 to 2000 face lift so i will be using those type of fog lights and switch etcetera. and i have no idea where to start i know i need the switch and the wiring and it looks like there is already factory fog light wiring there! or at least right behind the valance panel and i looked at the 03 and 98 to 2000 style of fog lights connector and there the same so that shouldn't be an issue i just need help with the wiring itself i would also like to do it as oem as possible thank you for reading and i appreciate any input!

 

[BobSacamano]

I would look in your fuse box under the hood to see if the fog relay is there and then behind the bumper to see if the fog light connectors are there. They will have tan/orange wires. if so all you need is the switch and the fog lights (and maybe brackets). And if you want an OEM look, get a radio bezel with the hole for the switch.

 

[red Ranger (Sarah)3.0L]

I would look in your fuse box under the hood to see if the fog relay is there and then behind the bumper to see if the fog light connectors are there. They will have tan/orange wires. if so all you need is the switch and the fog lights (and maybe brackets). And if you want an OEM look, get a radio bezel with the hole for the switch.

ah ok thank you which replay is the fog light one? also i have the connectors down there i can get some pictures if you want? and the bezzle and switch wont be a problem because i can just order them from ford but i dont think there is wiring going up to the switch might have to work on that ! i looked back there and there were no wires or connectors hanging around