My Dad's 2007 Ranger.

[XLTsplash]

I just fixed up a 2007 Ranger that my uncle bought new. It only has 22K miles. My uncle wanted me to sell if for him. My Dad ended up buying it. This is my Dad's third Ranger, He bought his first in 1989, His second in 2000. The 2007 had a dented RF fender that I replaced, Also many scratches in the sides on the bed and tailgate that I fixed. I also did some dress up items to make the Ranger stand out.

 

[XLTsplash]

I added a bed cap, nerf bars, back up camera, sliding rear window and seat covers to my Dad's Ranger.

 

[RonD]

It's very nice looking, good work , but...........................it's not RED

The 1989 was a sweet ride as well

 

[XLTsplash]

I installed a remote power lock kit in my Dad's 2007 Ranger. It works very well and was easy to install. I didn't clamp the aftermarket rod to the stock lock rod. I instead used the factory lever that was on the latch for if the truck had factory power locks. I just cut down and bent the factory rod to fit in the stock location. I also replaced his Ranger's standard door panels with deluxe panels. I recovered the panel inserts with blue vinyl to match the seat covers. https://www.lmctruck.com/1983-11.../ford-keyless-remote-kit

 

[XLTsplash]

I found some pictures of my Uncle, Dad and I on the day my Uncle bought the Ranger new in 2007 from the dealership that I worked at.

 

[Kira]

Just wondering if the "60/40" seat in that 2007 would bolt into a 2005.
I like the split seat and absence of the coin holder.