My Bronco 2

[kroussinoffroad]

measure measure measure. put the arm's on the axle and the link bracket's on the arm's run threaded rod thru the bracket's to keep straight. measure,look, measure, look

 

[lethal-threat-b288]

Let me get your ttb

 

[4.0B2]

lol. same thing escort told me.. what is the best ways to measure? where do i measure from?

 

[4.0B2]

Let me get your ttb

its a d28, 3.73's, open... could get new pads, i have LLT warranty on them at the Zone needs a radius arm bushing really. its starting to have some slack in it. i'm gonna put the front part of my lift for sale... drop brackets for axles, sway bars, and ra's; then the lift coils. also thought about trying to sell the gears out of the ttb. didn't figure anyone would wanna buy anything else. someone may want the 3.73's tho. if i could get $200 out of the lift and gears i think i'd be happy.. of course buyer pay shipping.

why do you need a d28?

 

[kroussinoffroad]

where ever is gonna be semetrical to both side's i think i used my leaf spring mount's to measure forward off of . if you use the rusty's arm's everything is adjustable so as long as you get it pretty dang close you'll be fine.

 

[4.0B2]

yeah another reason i like rusty's. i don't know just how much adj i have there, but i think i can get it close enough. track bar mounts straight right? just driver side, in line w/ where it mounts on the axle??

 

[kroussinoffroad]

? you have me lost. ? it run's parallel with the drag link ?

 

[4.0B2]

right.. but what about how far from the front/rear of the vehicle is it? straight above the axle? if you were to look from the top down would it be directly on top of the axle? or farther to the front or rear

 

[kroussinoffroad]

so when i told you i would come help if i could. scratch that. WAY too hot. and there's alot of nasty shit down there. (snake's and spider's). F that. the only poison we have up here is liquor and ivy. if something is gonna bite you up here you normally have time to put it in your crosshair's before it happen's

 

[kroussinoffroad]

mine is mounted in front of the axle but behind the steering. passes just below the nut on the pitman arm/steering box.

 

[4.0B2]

so when i told you i would come help if i could. scratch that. WAY too hot. and there's alot of nasty shit down there. (snake's and spider's). F that. the only poison we have up here is liquor and ivy. if something is gonna bite you up here you normally have time to put it in your crosshair's before it happen's

MS is humid hot.. today it reached 86, wasn't to bad... but we have lots of snakes and spiders and stuff. and w/ our lake so high, the snakes are coming closer to the neighborhood for sure. and its gonna be like june july b4 i can do the swap. it'll be a good 100 degrees and like 110% humidity, ANOTHER DAY IN PARADISE!!!

i'm probably gonna make the neighbors mad and do a lot of my work from like 7pm to 1 am or so lol

edit: oh and misquotes, don't forget those little things... our bug zapper gets filled up over night w/ those dang things.

 

[kroussinoffroad]

hope you like ball gravy. 86 is a HOT day up here in the middle of summer. it might have hit 90-100 once or twice last year and that was the hottest summer in along time.

 

[4.0B2]

hope you like ball gravy. 86 is a HOT day up here in the middle of summer. it might have hit 90-100 once or twice last year and that was the hottest summer in along time.

i remember hitting 112(heck maybe more) last summer(before heat index), and the South's good ole humid summer heat.. its crazy. come join me one day.. and you'll see how much you like...i mean hate it.

it keeps the yankee's out tho!

 

[kroussinoffroad]

i was born in new mexico and spent much of my time as a kid in the south (air force brat)so i know what it's like and dont plan on returning anytime soon.

 

[4.0B2]

Mass air flow sensor was extremely dirty, clean now!
My k&n filter was the same way. But is also clean now. Maybe it'll help with my gas mileage

Tire pressure was good tho