my 01 ranger 4x4

[plumber1]

hey whats up im new to this form just wanna get some pointers how to make my truck look better than it is now the first is without new tires and the second one is with new tires everything is stock except wheels and tires i will get more pics later.

 

[Jay FX4]

Looking good! What size tires?

 

[c_note]

nice truck man. first thing id do is get rid of the pin strip.

 

[plumber1]

thanks guys and tire size is 265/75/16 yea i was thinking about taking it off would yall take the side steps off also

 

[Boggin]

yes, pin stripes and steps. i would add a Back Rack like this one

and put some lights on the back rack, maybe 4 square ones, crank your torsion bars about 2" get a 2 or 3" body lift and 33s
just my opinion

 

[Jay FX4]

Yes, I'd remove the steps, too. I'm not a fan of 4x4 and FX4 decals either, but I might be in the minority on that one.

 

[plumber1]

if i can the t bars will it mess the aligment up and how would i level the back out if i raise the front up 2"?

 

[c_note]

are those eagle alloys? i have a set and i painted them with a flat high temp engine paint. ive had them painted for 2 years and hardly any scratches

 

[Boggin]

it wont go out of align too much if you dont crank them alot, but i gues if your truck is level you dont really need to do it

 

[plumber1]

no there m/t classic ll i wanna lift it but i thought about raising the front 2 an the back 3 or 4

 

[Jay FX4]

if i can the t bars will it mess the aligment up and how would i level the back out if i raise the front up 2"?

I've put over 10K miles on my truck with my bars cranked about 1.5". No alignment problems and my tires are wearing properly.
Your back end is already a few inches higher than the front. Raising just the front makes the truck sit closer to level.

 

[plumber1]

so how many inches would you crank the front

 

[Boggin]

1-2..ive done mine 3 before, thatwas outta line

 

[plumber1]

ok thanks guys for all the pointers i will put some pics up soon

 

[Boggin]

no problem buddy