Mustang dash swap help

[red65stangcp]

So, I decided to install a 2000 mustang dash in my 92 ranger. I can do it all without any problem, I can mod pretty well. What I do needs help with is getting the heater hooked up nicey. I have looked for a while for a solution. I would rather put together something from stock parts. Anyone got a solution? Please

 

[Frank The Tank]

So, which part of the heater? Knobs, switches, vac lines or vent hoses?

 

[wr250rdr]

I think the problem is that(at least in my 94), the contol for the blender and temp are cable actuated, and the mustang is a vac opperated system.

what you could do

the space for the contol serface should be the same in both dashes, mount the ranger hvac contol into the mustang dash to verify.
Then take a pen and piece of paper and figure out the difference in depth of the mustang and ranger dash and either have new cables made or make your own to retain opperation.

If you want to use the mustang contol you are gunna have to get clever.