Welcome Visitor! Please take a few seconds and 
charlie brown
Well-Known Member
did my motor swap from a 88 2.9 to the 01 sport trac 4.0 sohc with the 5r55e trans. had the whole truck rewired from headlights to tail lights.
the trans does have a senor on the tail shaft that was move from the rear end some where from the person i got the set up from.
the person i had wired up the truck did not wire up this senor and i have nothing on my drive shaft.
so what am i going to need to get this going? is there a "relo" kit that may help me out?
does the speedo tone ring tie in to the ABS or can i bypass that?
the trans does have a senor on the tail shaft that was move from the rear end some where from the person i got the set up from.
the person i had wired up the truck did not wire up this senor and i have nothing on my drive shaft.
so what am i going to need to get this going? is there a "relo" kit that may help me out?
does the speedo tone ring tie in to the ABS or can i bypass that?
