• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Motor monuts


Eddies98Ranger

New Member
Joined
Apr 24, 2013
Messages
2
Vehicle Year
1998
Transmission
Manual
Hey everyone any body know where i can get engine conversion kits that fit a 1998 ford ranger Xlt. My cousin is giving me a 302 and ive looked every where for the mounts (bolt on) and im stuck in the mud any site would great..
 
How bout the ranger station tech section where it talks about mustang mounts
 
What is the engine out of?

On the 98-00 Rangers I know for a fact that with the 4.0L motor mounts and an engine out of a 98-99 Explorer or Mountaineer will nearly bolt up. You will have to carefully locate and drill out one hole for the drivers side. We set the motor in place, got things lined up, marked where the hole needed to be, lifted the motor back up enough to unbolt the plate from the side of the block, took it out, drilled the 1/2" diameter hole, put it back on, and lowered it in place. Aside from splicing 5 wires, everything else bolted up. 98-00 Rangers with an auto trans and 4x4 are by far the easiest to do the swap.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top