Lug Nuts

[petergharib]

Does anyone know the exact measurements and dimensions of the 1997 Mazda B4000 SE lug nuts? I just bought one that is in rough shape. I am taking the wheels off and nearly every single one is getting stuck in the sockets I'm using. I have thrown away 5 sockets already and I've only done 2 wheels. I wanna replace all the lug nuts but I don't want to get the wrong size. I went to one place and they told me the ones on the back are different from the ones on the front because of the drums vs rotors...

 

[AllanD]

The nuts are the same front and rear.

they are 1/2-20 Right Hand thread

My lugnuts are all chrome acorn nuts made by McGuard(the locking lug company)
that they sell as their "Tough nuts"

I grab every one I see when I come across them in the junkyard.

They aren't cheap but you cannot buy better lug nuts...

 

[petergharib]

The nuts are the same front and rear.

they are 1/2-20 Right Hand thread

My lugnuts are all chrome acorn nuts made by McGuard(the locking lug company)
that they sell as their "Tough nuts"

I grab every one I see when I come across them in the junkyard.

They aren't cheap but you cannot buy better lug nuts...

I just ordered some. You're right. They're not cheap.

 

[adsm08]

SFXperformance.com sells McGaurd nuts pretty cheap.

I got these guys for my Ranger (not those exact ones, but those are the right style, just the wrong thread) they are all one piece, no tin caps or anything, and not painted, the metal is dyed, so the finish can't be damaged.

 

[enjr44]

If they look like these

http://www.1aauto.com/wheel-nut-dor..._content=WHK&gclid=CJT2iZS268oCFVc1aQoddVcAbw

go to a junk yard and get a ton of them off some rangers. They don't charge for them (at least here). And get a six point socket.

 

[petergharib]

If they look like these

http://www.1aauto.com/wheel-nut-dor..._content=WHK&gclid=CJT2iZS268oCFVc1aQoddVcAbw

go to a junk yard and get a ton of them off some rangers. They don't charge for them (at least here). And get a six point socket.

i was told those are only good for the steel wheels. not the mags