lowering 90 b2 in front

[sean87]

hey guys I am new to the lowering thing, so take it easy on me. I am possibly buying a 2wd 90 b2 and was thinking about lowering it, all the beams and what not I see are for rangers, the back shouldnt be a problem but would you all recomend for the front, and if any of you have lowered b2's pls post pics thanks

 

[Hazmat Ranger]

Try this one: http://www.therangerstation.com/forums/showthread.php?t=22522

Welcome to TRS - give us an introduction in the Intro section and show some pics of your ride.

Another piece of sound advice - try searching the forum and/or check the Technical Library and if you are still lost check back with your other Q's - good luck with your mods and again - Welcome . . .

 

[sean87]

thanks for the info, I looked through that one, and am still kind of confused on it, from what I understand they are saying I will have to go to the junk yard and get everything from the stock suspension from a 2wd ranger and swap the xmembers and what not then get a set of beams and lowering springs for the front, then do a flip kit for the rear, is this correct, and if so what would I need from the junk yard to make it work right? thanks for the help

 

[Hazmat Ranger]

sean - I really wish I could provide additional information to you about that. I am not that familiar with the B2, but I am sure someone should be able to shed some light on it. Try a google search if you haven't already. Good Luck

 

[sean87]

any body else know much about the front suspension set up on these bronco 2's and what it takes to lower them, thanks

 

[95offroadx]

its a different ibeam setup....Youll need to get the chassic tech bronco II lowering i beams its the easiest way. they are like $450 for both.. The bronco II ibeams are differnt from rangers, i dont know how but i used to want to lower my brII now it just collects rust