Wanted Looking for 83-90 Non-AC Heater Box

[Hawk Ranger]

I'm gonna need one of these before it turns cold again. Anyone have one they are willing to part with and ship to 28787?
Many Thanks

 

[SenorNoob]

Wishing you good luck. Those are hard to come by these days.

 

[Hawk Ranger]

Thanks. They are hard to come by for sure! I have contacted at least 5 salvage yards that have posted ads for the blower motor on eBay w/ pics showing it still attached to the box. But when I call they don't have it. I may have to cut up an A/C box and cobble something together.

 

[SenorNoob]

Material feels like polypropylene if you wanna try and weld it...

 

[Curious Hound]

Early on in my Ranger career, I made a habit of watching for one of those for my 93 every time I went to the junk yard. One day, I saw one and grabbed it as soon as I could. Don't think I've seen one since.

 

[Hawk Ranger]

You were smart to grab it....I posted here last year for one and never heard a peep....
Weld Polypropylene? Is there a practical (i.e. affordable) way to do that? I know a lot of glues won't do the job. Is there an epoxy that works?

 

[Brain75]

I bet I could snag one just about any trip to the yard. most all of the rangers here in Colo are non-ac to begin with (mine is as well - it's a colo native). Problem is I almost never go anymore - I have everything I could want (except power windows, power locks and AC....)

 

[Curious Hound]

You were smart to grab it....I posted here last year for one and never heard a peep....
Weld Polypropylene? Is there a practical (i.e. affordable) way to do that? I know a lot of glues won't do the job. Is there an epoxy that works?

 

[JoshT]

Next time I get to the u-pull-it I'll see if they have any, but it might be a while with our summer temps. I'm going to guess that the part itself would be about $20, but can't begin to say on the shipping.

 

[Hawk Ranger]

Next time I get to the u-pull-it I'll see if they have any, but it might be a while with our summer temps. I'm going to guess that the part itself would be about $20, but can't begin to say on the shipping.

Next time I get to the u-pull-it I'll see if they have any, but it might be a while with our summer temps. I'm going to guess that the part itself would be about $20, but can't begin to say on the shipping.

Thank you Josh.....That would be very kind. I would be glad to cover any expenses plus a finders fee. I've been looking for 2 years. I've called yards in North Carolina, Colorado, Oregon and Minnesota after seeing what I need in a photo on eBay. But always told they did'nt have it.
Thanks again,
--Lanny--

 

[Brain75]

you said you tried Colorado, did you hit up Fort Morgan? (the big cities have less "country trucks") and Ft Morgan is about as far out in the country as you can get without going to full on no-where-s-ville (where I live).

West Side Auto Parts, Fort Morgan (CO)

Check West Side Auto Parts used auto parts store serving Fort Morgan and nearby areas in Colorado. Find contact info, hours, reviews, along with features and services.

www.salvage-parts.com

Ft Morgan is the kind of shop where they pull it, clean it up, mark it up significantly and sell "by the part".
from that listing I linked - 970-867-2486. I never go there cause they are an extra hour away and charge 2x as much.

Where I go is no inventory - it is a true u-pull-it so you have to show up in person. - Atwood Auto and Metal

Atwood Auto & Metal in Atwood, CO | USJunkYards

Atwood Auto & Metal is located in Atwood, CO ✔️ Find contact information, reviews, photos, and opening hours in our USJunkYards salvage yard database.

usjunkyards.com

(Atwood is $1/ft on un-listed plastic, so probably like $8 for such an item, ft morgan probably wants $40).


And just to confirm you want a 1st/2nd gen even though your profile says you have a 96?

 

[lowspeedpursuit]

Are they actually different '91+? I thought they were all the same for a long time.

I think I kept my original box in the basement for years, but eventually threw it out. I'll look around.