line from clutch master cylinder to slave came loose

[fishon79]

i have a 94 4x4 with a 4.0 5 speed.The hydraulic line running from clutch master cylinder to slave cylinder came out of the master cylinder. Ican put it back in and there is a snap pin holding it in place. Anyone ever had this happen. Is the clutch master cylinder to be suspect. Im a little confused I dont want it to happen again.

 

[srteach]

The line from the clutch master to clutch slave is factory assembled. If it fell out of the clutch master cylinder without the pin falling out, something is broken. I would expect the line to fall out again, and they are notoriously difficult to bleed. I would not trust that clutch master from now on. Replacing the master would be best and cause the least problem in this case.
I just replaced my clutch master cylinder yesterday. Took about 1 hour. Mine cost $95 + shipping and it came fully bled in the box.