lights

[Fordisthebest30]

im putting in new visor lights for my truck. i have a 97 mazda b4000 4x4 2 inch lift with 31s. i want to put in new visor lights for a non stock visor but i cant figure out how to wire it or how to get the wires down to the fuse. would i piggy tail the lights or run one wire for each down to one fuse in the fusebox? and how would i get those wires down there without looking totally ghetto?
heres my truck
and btw how do i put pictures on my threads?

 

[02RangerXLT]

You need a www.photobucket.com account to post pictures, its very simple to use.

 

[That Baker Guy]

what kinda of visor are we talking about here like inside the cab or like a sun visor with the roof lights? if its a sun visor like i suspect then you will have to drill holes in your roof, and run *one* *fused* wire from the fuse block or the battery depending on how you want to do it, along with a switch somewhere in there, run that wire up to the lights then from that wire run a wire from it to each of the lights.

 

[Fordisthebest30]

so just connect them all to one wire and run it into one fuse? im connecting them into my parking lights so they'll automatically turn on when i turn my regular headlights on. i have a photobucket account and which one do i post on this ? everytime i do its just a link

 

[That Baker Guy]

so just connect them all to one wire and run it into one fuse? im connecting them into my parking lights so they'll automatically turn on when i turn my regular headlights on. i have a photobucket account and which one do i post on this ? everytime i do its just a link

post the one with IMG at the front, and yes connect them all to one wire for power and either ground them all separately or ground em all with one wire.

 

[Fordisthebest30]

This is before i have done anything to it. I have only had it for maybe two months and i have put a diamond plate toolbox on it, chrome tie downs, I cherry bombed it, and new front breaks
I plan to get:
HID's
PIAA baja lights
brush guard