lift kit help!

[kevinhamblin]

I have a 1996 2wd 2.3 5 speed ranger that I just finished swaping in a 8.I rearend and leaf springs from a 2001ranger edge. After the swap the rearend sits about 2 in higher in the back, i was looking at getting a leveling kit that raises the front end 2in has anyone ever installed one or know how difficult it is to adjust the camber?? Any info will help thanks guys

 

[daniel3507]

Not hard to install but you will need an alignment afterwards to get the camber back in order

 

[kevinhamblin]

I watched a video online and they said I will need a new camber shim or bushing to adjust the camber back to normal? Or would the stock one be enough to bring it back to normal?

 

[brinker88]

You will need a different camber bushing in the upper balljoint. Look into Rough Country leveling coils. They're cheap and dont use the bullshit "spacer" to lift your truck.